Secondary menu

Search form

Powered by

Jetting carb

Hi all, just aquired an old Wildstar that has straight through short shot pipes fitted and a high flow air filter. I don't think it has been jetted properly as it runs very rough above third throttle. Can any one offer some info on jet sizes and needle position please?



1 Comment

Buy a Barons jet kit. Example:
The tapered needle is a major plus.
167.5 main jet, 172.5 with unbaffled pipes.
37.5 pilot jet,
Install the clip in the 4th groove on the needle with the plastic spacer and 1 silver washer below the clip.
Turn the pms screw 2.5 turns out.
Set the idle to 900-950 rpm.
If you have never been into the carb leave the float alone.

Add new comment

Please login if you already have an account or enter your details below to create one.

Your Details
This is a "Tech Help" discussion, please avoid off-topic comments.